my car is boke. - Original Pony Car

**aar0s** · 08-31-2009, 05:34 PM

I'm taking my vert in tomorrow for an out-patient procedure to have the u-joints replaced. I wish that i had the funds to but a alum. DS but alas i am boke too.:bang: and i want the car running before the weekend.

**BlownFiveLiter** · 08-31-2009, 05:36 PM

R key stop working?

I never did go work on mine today. I just want it to run.

**94gtfreak** · 08-31-2009, 06:57 PM

I think he was tryin to say it like a lil kid would? If not, I'd take a look at ur keyboard? LOL!

Hopefully u get it fixed....and Matt,

what the hell man! lol...U guys are just to easy to pick on I swear!

**aar0s** · 08-31-2009, 07:36 PM

no i can dive my ca, it just makes a clunking sound when i go from evese to dive. that coupled with the vibation and a dagin feel leeds me to belive the u-joints ae shot. it goes to the ca docto tomoow

Torq armd twinscrew · 09-01-2009, 02:04 AM

Are you the slightest bit mechanically inclined? U-Joints are extremely simple and unless your getting them replaced for next to nothing, i recommend that you attempt this yourself. All you need is a vise, large hammer and needle nose pliers. wait, i forgot. 12 point 12 mm socket 6'' extension and a ratchet for the flange bolts. Seriously simple. if you have questions post them up. I'll walk you through it. pm me your phone number if thats easier for you, i'll talk you through them if thats what you want.

**aar0s** · 09-01-2009, 06:15 AM

Thanks for the offer but i dont have a floor jack, jack stands (both are on my Christmas list) or the time to do it. But i may take you up on that offer in the future!

**aar0s** · 09-01-2009, 08:35 PM

whoot! running smooth and noise free now! it fixt.

**94gtfreak** · 09-01-2009, 08:38 PM

WOOHOO!!!!!

**aar0s** · 09-01-2009, 08:57 PM

yep i use to get a poping from the underneath when i pulled from a stop but now the only time it pops is w.o.t. and thats very little. no clunking or any other foolishness.
now its time to start over with the saveing for the FPR and new intake gaskets.

**94gtfreak** · 09-01-2009, 10:22 PM

I used to get a poppin sound from a start..turned out the driveshaft bolts were walkin themselve's out!

**aar0s** · 09-01-2009, 10:32 PM

thats no good.

**94gtfreak** · 09-01-2009, 10:45 PM

Yeah...scared the hell outta me! I put a tube of thread locker on em and tightened them down real good! It was a PITA to break em loose when I did the clutch but I did break 'em loose!

08-31-2009, 05:34 PM	#1 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	my car is boke. I'm taking my vert in tomorrow for an out-patient procedure to have the u-joints replaced. I wish that i had the funds to but a alum. DS but alas i am boke too.:bang: and i want the car running before the weekend.

08-31-2009, 05:36 PM	#2 (permalink)
BlownFiveLiter OPC Staff Join Date: Jul 2009 Location: Chicago 'burbs Posts: 587	R key stop working? I never did go work on mine today. I just want it to run. __________________ Matt 1995 Mustang GT Mustang's Mods Vortech V2SQ \| TFS Twisted Wedge heads \| TFS 51402000 (stage 1) cam \| Typhoon intake 70mm throttle body \| SCT BA-2400 MAF \| Siemens 60lb. injectors \| Dual 255lph fuel pumps TwEECer RT \| MAC off road X-pipe \| Flowmaster 2 chamber mufflers Cobra front brakes \| 2000 Cobra R wheels \| 96-98 export taillights

08-31-2009, 06:57 PM	#3 (permalink)
94gtfreak OPC Staff Join Date: Jul 2011 Posts: 347	I think he was tryin to say it like a lil kid would? If not, I'd take a look at ur keyboard? LOL! Hopefully u get it fixed....and Matt, what the hell man! lol...U guys are just to easy to pick on I swear! __________________

09-01-2009, 08:38 PM	#8 (permalink)
94gtfreak OPC Staff Join Date: Jul 2011 Posts: 347	WOOHOO!!!!! __________________

09-01-2009, 10:22 PM	#10 (permalink)
94gtfreak OPC Staff Join Date: Jul 2011 Posts: 347	I used to get a poppin sound from a start..turned out the driveshaft bolts were walkin themselve's out! __________________

08-31-2009, 07:36 PM	#4 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	no i can dive my ca, it just makes a clunking sound when i go from evese to dive. that coupled with the vibation and a dagin feel leeds me to belive the u-joints ae shot. it goes to the ca docto tomoow

09-01-2009, 02:04 AM	#5 (permalink)
Torq armd twinscrew Member Join Date: Aug 2009 Posts: 59	Are you the slightest bit mechanically inclined? U-Joints are extremely simple and unless your getting them replaced for next to nothing, i recommend that you attempt this yourself. All you need is a vise, large hammer and needle nose pliers. wait, i forgot. 12 point 12 mm socket 6'' extension and a ratchet for the flange bolts. Seriously simple. if you have questions post them up. I'll walk you through it. pm me your phone number if thats easier for you, i'll talk you through them if thats what you want.

09-01-2009, 06:15 AM	#6 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	Thanks for the offer but i dont have a floor jack, jack stands (both are on my Christmas list) or the time to do it. But i may take you up on that offer in the future!

09-01-2009, 08:35 PM	#7 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	whoot! running smooth and noise free now! it fixt.

09-01-2009, 08:57 PM	#9 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	yep i use to get a poping from the underneath when i pulled from a stop but now the only time it pops is w.o.t. and thats very little. no clunking or any other foolishness. now its time to start over with the saveing for the FPR and new intake gaskets.

09-01-2009, 10:32 PM	#11 (permalink)
aar0s OPC Staff Join Date: Jul 2011 Posts: 602	thats no good.

09-01-2009, 10:45 PM	#12 (permalink)
94gtfreak OPC Staff Join Date: Jul 2011 Posts: 347	Yeah...scared the hell outta me! I put a tube of thread locker on em and tightened them down real good! It was a PITA to break em loose when I did the clutch but I did break 'em loose! __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode